An embroidered name is the only name on school uniform that lasts as long as the garment; everything else is a label that eventually comes off, with one maker guaranteeing iron-ons for 10 years and another promising 50 washes from a stamp. Below: the five ways to name a jumper, what each maker publishes about wash life as of October 2026, what fails on polyester and frayed care labels, and how a stitched name at £2.50 fits into a school uniform embroidery order.The five ways to name a school jumper
| Method | Where it goes | What the maker publishes on wash life | Where it fails |
|---|---|---|---|
| Iron-on label | Inside the neck or hem, on the fabric itself | My Nametags gives a 10-year washing machine guarantee and says its labels stay on through the tumble dryer (maker's page). Stikets' 50 x 20 mm iron-on is applied for 8 to 15 seconds without steam and washed at up to 60°C, 16 labels £8.95 (maker's page). No wash count is published by either. | Fabrics an iron cannot take: polyester PE tops, fleeces, waterproofs and anything with a low-temperature care label. A cool iron does not bond the adhesive and a hot one melts the shirt. |
| Stick-on label | The care label, never the fabric | My Nametags says its stickers go on care labels and survive washer, dryer and dishwasher "countless times"; no count published. | A care label that frays or is cut out. Sensory-sensitive children cut the label out first, and the name goes with it. |
| Name stamp | The care label or a light inside hem | Stamptastic's bundle is £14.99 and the maker claims "minimum 50 washes on care labels" (maker's page). | Dark fabric: a black ink stamp on a navy jumper's hem is invisible. The claim is for care labels, which are white. |
| Laundry pen | The care label | None found from any maker. | Dark fabric, and bleeding into the weave so the name reads as a smudge after a term. |
| Embroidered or printed name | On the garment, below the crest, on a sleeve or on a stitched tab | Embroidery outlasts the garment; a DTF printed name is washed below 30°C inside out on a Gildan Softstyle tee. | Cannot be moved to the next child. A hand-me-down carries the first name forever, which some parents count as a feature. |
What fails, by fabric
Iron-ons on polyester. Most school PE tops, fleeces and anything "easy care" are polyester or a poly-cotton blend with a one- or two-dot iron symbol. The adhesive on an iron-on label needs more heat than that fabric allows. Iron it cool and the edge lifts in the first wash; iron it hot and you glaze the fabric. The makers do not list unsuitable fabrics on their product pages, so parents find out at the ironing board. A heat press at a controlled 135°C, which is what we use for polyester, is a different tool from a domestic iron and a different outcome. Stick-ons and stamps on a frayed care label. Both are fine while the label is whole. Once a child has picked at it, or it has been through sixty washes at 40°C, the printed care text is gone and the name with it. A stamp also needs a pale label; stamped onto a navy hem it cannot be read without a torch. Pens on dark fabric. Navy, black and bottle green are most of the school uniform in the country. A laundry pen on them reads only on the white care label, which brings you back to the problem above.
The embroidered name: £2.50, on the garment or a tab
A stitched first name is £2.50 a name at Brandum as of October 2026. It goes below the school crest on the chest, on the sleeve, inside the back neck, or on a small fabric tab stitched to the inside hem where the school wants the outside plain. Parents sending in their own garments pay £1 handling each, and the garments are at the customer's risk; most of what we stitch names on is bought through our kids' range in the same order. The sensible time to do it is when the crest is being stitched. A school or PTA bulk order for school printing goes through the machine once; adding the name means a second colour and a second stop, not a second visit. The lettering is kept above the size where the stitches close up and the name turns into a bar; the embroidered text size post covers that limit, and we will tell you if "Oluwaseun" needs a wider tab than "Ava". Printed names are the alternative for PE tops, where a stitched name on thin polyester can pucker. A DTF printed name is pressed at 135°C on polyester and 150°C on cotton, and it is the same process we use for sports names and numbers. Washing: below 30°C and inside out for a print; embroidery takes a hotter wash without complaint. The care guide has the full table.