1. Prepare the Heat Press- Set the temperature of your heat press to 160 degrees Celsius.
2. Adjust the Pressure- Use an medium pressure setting on the press.
3. Positioning the Garment- Smoothly place the cotton garment onto the press.
4. Cover with Parchment Paper or Teflon Sheet- Place a sheet of parchment paper or Teflon sheet over both the garment to Preheat the garment for 5 seconds with heat press
5. Apply the Transfer Film- Position the DTF transfer film onto your desired area of the garment.
6. Cover with Parchment Paper or Teflon Sheet- Place a sheet of parchment paper or Teflon sheet over both the garment and transfer film.
7. Pressing Time- Apply pressure to the garment with the transfer for 14 to 18 seconds.
8. Removing Backing Film- Our film is designed for release so carefully peel off the backing film from the transfer.
9. Re pressing if Needed- If necessary cover the transferred area more with parchment paper or Teflon sheet and apply brief pressure for 2 3 seconds.
10. Allow Cooling and Setting- Letting it cool down properly is crucial so avoid stretching or washing any transfers for 24 hours to ensure adhesion and durability.
By following these instructions you can achieve a high quality DTF design transfer, onto cotton fabric resulting in a print that lasts longer.
1. Prepare the Heat Press- Set the temperature of your heat press to 138 degrees Celsius.
2. Adjust the Pressure- Use an medium pressure setting on the press.
3. Positioning the Garment- Smoothly place the cotton garment onto the press.
4. Cover with Parchment Paper or Teflon Sheet- Place a sheet of parchment paper or Teflon sheet over both the garment to Preheat the garment for 5 seconds with heat press
5. Apply the Transfer Film- Position the DTF transfer film onto your desired area of the garment.
6. Cover with Parchment Paper or Teflon Sheet- Place a sheet of parchment paper or Teflon sheet over both the garment and transfer film.
7. Pressing Time; Apply pressure to the garment with the transfer for 14-16 seconds.
8. Removing Backing Fil- Our film is designed for release so carefully peel off the backing film from the transfer.
9. Re pressing if Needed- If necessary cover the transferred area more with parchment paper or Teflon sheet and apply brief pressure for 2 3 seconds.
10. Allow Cooling and Setting- Letting it cool down properly is crucial so avoid stretching or washing any transfers for 24 hours to ensure adhesion and durability.
By following these instructions you can achieve a high quality DTF design transfer, onto Polyester fabric resulting in a print that lasts longer.
